The Difference Between Damp-Proofing and Waterproofing

If your basement is leaking from the outside of your home, you can fix it by exposing the foundation and applying the necessary waterproof material to create a foundation system that will allow water to escape. One of the best ways to fix basement leaks is with this solution.

The materials that are used for waterproofing include hydro guard, two layers of hydro guard, reinforcement mesh, air-gap drainage, drainage tile, and 1/3 inch gravel.

The Differences Between Damp-proofing vs. Waterproofing Your Basement

Is there a difference between the termsdamp-proofing andwaterproofing when it comes to your home’s foundation? What do they mean?

There are differences that are very significant.

A liquid asphalt-based product is applied thinly to your foundation. damp proof doesn’t provide crack-bridging capabilities since there is no rubber The cost to cover 100 feet of any foundation is between 20 and 30 dollars and is done during the construction phase. The homes built prior to 1980 do not have the protection of damp proof. Water can penetrate damp proof, so it cannot protect from it.

A process that waterproofs and seals the foundations is called exterior waterproofing cracked foundations. Hydro Guard is used in our main process. It costs between $200 and $250 to cover 20 feet. RCC can guarantee 50 years of protection against water and water penetration with the use of a commercial-grade product.

The products used to complete the work should be cautious. Many contractors and waterproofers use damp-proofing products to reduce the cost of their materials

Exterior Waterproofing Benefits

Sources of musty odors and allergens are eliminated when the basement is damp. This leads to reduced costs of future home repairs and prevents loss of personal belongings due to a water-leakage. It is possible to increase the value of a home if it experiences water and water problems. If you want to increase the value of your home, you need to hire waterproofers to fix basement issues. Future problems like interior cracks and shifting of floors can be caused by water leaks, which weaken the structural base of your home. It’s important that you have peace of mind for the structural safety of your home.

Common Exterior Leak Problems

Water can get into your window through the window sill. Adding or replacing malfunctioning window wells with installation of vertical weeping tile and a bedding of gravel will ensure that water entering your window area will be drained. This will make your basement less likely to be flooded.

Air voids and mortar joints can allow water to enter the walls. A combination of internal and external methods can be used to prevent and repair water intrusion. Water pooling can be drained by drilling through the interior of the foundation.

Joint leaks include the junctions between your wall and footing, the basement floor and the joints where extensions have been built. There are various types of joints. The modified cement is used to prevent further damage.

If the original seal has deteriorated, the top of the foundation could become a spot where water could leak from if the sill is not sealed. It’s important to keep the Sill waterproof to prevent water penetration into it. Water can still find its way through this spot.

Exterior Waterproofing Process

1 Most excavations range from 4 to 8 feet deep and 2 12 feet wide. The elevation of the property affects the dimensions of the excavation.

Installation of speed shiring is done to ensure the safety of workers and prevent soil from being re-filled.

The old weeping tile can be taken out of the ground if the footing is reached. A new tile is installed.

Foundation walls are cleaned and inspected for any structural cracks. The areas are chiseled out and repaired with specialized cement that expands when applied to the crevices.

The Trowel-On Rubber Membrane is a central component to exterior waterproofing. In case of further foundation movement and settlement, it’s designed to expand.

Installation of mesh on top of the first layer of rubber is used to act as a secondary rubber layer

The drainage is fastened to the top of the bar.

If your home has windows that are below grade, you need a window well installed. A weeping tile is installed down from the inside of the window well. Make sure your weeping tile and pipe do not touch.

A layer of gravel is placed over the weeping tile to maximize drainage. The layer of gravel is mixed with the soil to prevent the tile from absorbing too much water.

Once the soil has been restored to its original places, you will have no more issues with water penetrating your basement exterior or interior.

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like